Instrument Cluster

Instrument Cluster

• Before removing instrument cluster, the work procedure => [ Instrument Cluster, Adaptation/Replacing ] Instrument Cluster, Adaptation/Replacing must be performed in every case to read out data stored in the control module.

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Remove driver's side panel.

- Remove instrument cluster panel.

- Remove mounting bolts - arrows - of instrument cluster - 1 -.





• The fixed electrical connection to the instrument cluster is disconnected automatically when the cluster is pulled out of the instrument panel opening. Harness connector is installed permanently in vehicle and is disconnected automatically when pulling out instrument cluster.

- Pull instrument cluster - 1 - out of instrument panel.

Installing:

Install in reverse order of removal.

- After installing, test the functions of the instrument cluster.