Rear Interior and Reading Lamps

Roof Trim Lamps and Switches

Rear Interior and Reading Lamps

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ((3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing:

- Turn off the ignition and all electrical consumers.

- Disengage retainers - arrows - and remove panel with diffusion lens from interior and reading lights.





- Disengage retaining tabs - arrows - and remove interior and reading lights from molded headliner.





- Disconnect the connector - arrow -.





Installing:

Install in reverse order of removal.