HID Headlamp Range/Cornering Lamp Control Module (J745)

Headlamps

HID Headlamp Range/Cornering Lamp Control Module (J745)

- Remove the glove compartment.

- Unlock the connector in - direction of arrow - and disconnect the connector - 1 - from the headlamp range/cornering lamp control module - 2 -.





- Remove the mounting bolts - arrows - and remove headlamp range/cornering lamp control module - 1 -.





Installing:

Install in reverse order of removal, noting the following:

• After installing a new Headlamp Range/Cornering Lamp Control Module, module must be coded, refer to => [ Headlamp Range/Cornering Lamp Control Module, Coding ] HID Headlamps and then headlamp basic setting must be performed.

- Check headlamp for function.

- Check headlamp adjustment and adjust headlamp if necessary.