Automatic Headlamp Control, Checking Function

03 - Service Procedures

Automatic Headlamp Control, Checking Function

• Automatic headlamps are also called Automatic Headlamp Control.

• Vehicle must be in daylight.

Checking in daylight or brightness

- Switch ignition on.

- Turn light switch - 4 - to automatic headlamps position - 2 -.





The headlamps should not come on when it is bright.

Checking at night or in darkness

• Ignition is switched on

• Light switch is on automatic headlamps

Rain/Light Recognition Sensor -G397- is secured to rearview mirror bracket.





Rain/Light Recognition Sensor -G397- is located in upper center area of front windshield - arrow -.

- Cover area where rearview mirror is secured with hand or suitable object from outside of windshield - arrow -.

The decrease in light is measured and the headlamps are switched on.

- Turn light switch - 4 - to "O" position - 1 - and switch ignition off.