Storage Compartment Illumination (L120)

Center Console Lamps and Switches

Storage Compartment Illumination (L120)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ((3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Carefully remove trim - 1 -.





- Remove screws - arrows -.





- First pull panel toward rear in - direction of arrow 1 -, then upward in - direction of arrow 2 - and remove panel.





- Unclip harness connector - 2 -, disengage it and disconnect connector.





- Unclip Storage Compartment Illumination - 1 - and remove it with wire.

Installing:

Install in reverse order of removal.