Hood Sensor/Switch (For Alarm): Service and Repair

Front Hood Switch (F266)

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Remove hood lock.

- Disengage harness connector - 2 - and disconnect it.





- Unclip wire retainer - 1 -.

- Cut cable tie - 2 -.





- Disengage retaining lug - 1 - and move the Front Hood Switch in the longitudinal holes so that it can be removed.

Installing:

Install in reverse order of removal.