Drivers Front Airbag Crash Sensor G283

Crash Sensors

Driver Front Airbag Crash Sensor G283

• The Driver Front Airbag Crash Sensor (G283) is installed behind the front lid lock.

Removal

CAUTION!
Read the Safety Instructions for working with airbags, belt tensioners and battery cut-out units.

- Disconnect vehicle battery.

- Press connector lock - 1 - and disconnect connector - 2 - from Driver Front Airbag Crash Sensor (G283) - 3 -.





- Remove the two bolts - 4 - (5.4 Nm).

Installation

- To install, perform the steps used for removal in reverse order.

- Switch on ignition.

CAUTION!
Make sure that no persons are in the vehicle.

- Connect vehicle battery.