Diagram 110/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


SB-Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J104 - ABS Control Module Control Modules in Engine Compartment

SA7 - Fuse 7 (on fuse panel A)

SB33 - Fuse 33 (on fuse panel B)

SB44 - Fuse 44 (on fuse panel B)

SB45 - Fuse 45 (on fuse panel B)

T3af - 3-pin connector

T4r - 4-pin connector

T4u - 4-pin connector

T6w - 6-pin connector

T6z - 6-pin connector

T26a - 26-Pin Connector, on electronics box

T38 - 38-pin connector

T40 - 40-Pin Connector, under electronics box, in engine compartment

V144 - Leak detection pump EVAP System

Z19 - Oxygen sensor heater Locations

Z28 - Oxygen sensor 2 heater Locations

Z29 - Heater for oxygen sensor 1 after catalytic converter Locations

Z30 - Heater for oxygen sensor 2 after catalytic converter Locations

(508) - Terminal 30 threaded connection (on E-box)

(518) - Terminal 30a threaded connection 8 (on relay panel)

(B355) - Positive connection 6 (87a) (in main wiring harness)

(B367) - Positive connection 18 (87a) (in main wiring harness)

* - Only applicable to US/CDN

Previous Diagram 110/4 (Tracks 29-42)

Next Diagram 110/6 (Tracks 57-70)