Suspension Control Pressure Sensor/Switch: Service and Repair

Front Wheel Drive (FWD)

Left Rear Level Control System Sensor, through MY 2007

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1331)

Removing

- Disconnect the connector - 1 -.





- Remove the bolts - 2 - and - 3 -.

- Remove sensor.

Installing

Installation is performed in the reverse order of removal. Observe the following when doing so:

Sensor lever must face toward outside in direction of travel.

- After replacing, perform basic setting for headlamps.

Tightening Specifications