Undamaged Window, Preparing For Glazing

Flush Bonded Windows

Undamaged Window, Preparing for Glazing

CAUTION!
Do not prime the adhesive surface or use a cleaning solution on it. Keep the adhesive surface free of dirt and grease.

Do not yet treat the cut adhesive surface with the activator.

• When re-using an undamaged window, cut back remaining adhesive sealant to 1 to 2 mm shortly before re-adhering, do not damage primer and ceramic coating.





• The remaining material serves as a base for the new adhesive sealant being applied.

CAUTION!
Exception: If the bonding is going to be performed longer than one day after cutting back the adhesive bead, then then remaining material must be activated with the (D 181 801 A1).

Apply the activator evenly and in one wiping motion using the (D 009 500 25).

Do not let the activator come in contact with the paint because this will damage the paint.

Drying time is approximately 10 minutes