Rear Door Window

Rear Door Window

Window Guide

Removing





Center bar has been removed.

For window guides with trim molding

- Push window guide in top rear area - 4 - slightly aside.

- Remove the clip - 3 -.

All window guides

- Fold seal of window guide - 1 - from inside from window frame.

- Using (T 10236), disengage retaining tab on guide pin - 4 - in window frame - 1 -.

- Pull off window guide all around and evenly - arrows a and b - from door flange.





- Begin this - arrow a - at fixed door window.

- Pull window guide including fixed window out of door upward and at an angle - arrows c -.

Installation

To install, perform the steps used for removal in reverse order.

Tightening specification for screws - 2 -: 2 Nm

• A function test must be performed before door trim is installed.

• While installing window guide, make sure it is seated evenly (wind noise).