Rear Window Wiper Blade Park Position, Adjusting

Rear Window Wiper Blade Park Position, Adjusting

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1331/)

Distance - x - between wiper rubber blade tips - 1 - and lower edge of window - 2 - must be 23 mm.





- If necessary, set end position of rear window wiper by offsetting wiper arm.

Remove wiper arm, refer to => [ Rear Window Wiper Arm ] Rear Window Wiper Arm.

- Tighten all threaded connections to the specification shown in => [ Fastener Tightening Specifications, Rear Window Wiper and Washer System ] Fastener Tightening Specifications, Rear Window Wiper and Washer System.