Door Window, Removing and Installing

Door Window, Removing And Installing

Removing

NOTE:
- Removing and installing is described only for the right door window. Removing and installing the left door window is derived accordingly from this.
- Bolts - 3 - have a left-hand thread.







- Remove front door trim.







- Pry out cover caps - 2 -.
- Lower door window until clamping screws - 3 - of door window are accessible.
- Loosen bolts - 3 - (do not remove. left-hand thread) and press clamping brackets apart.

NOTE: If the work step is not possible due to a malfunction via the electrical window regulator, window regulator motor can be unscrewed to be able to slide window down.







- Raise rear door window and swivel out of door toward front in - direction of arrow -.

Installing

NOTE:
- Removing and installing is described only for the right door window. Removing and installing the left door window is derived accordingly from this.
- Bolts - 3 - have a left-hand thread.







- Swivel door window - 1 - into door in - direction of arrow -. Make sure that door window is inserted correctly in window guide.







- Without using pressure, guide door window into clamping brackets - arrow a -.
- Align door window to window frame - arrow b -.







- Tighten clamping screws - 3 - (qty. 2 left-hand thread), tightening torque: 8 Nm.







NOTE: Bolts - 3 - have a left-hand thread.

- Then, continue in reverse order of removal.
- Before installing door trim, check function of door window.