Stop Buffer, Adjusting

Rear Lid

Stop Buffer, Adjusting





- Tighten the stop - 2 -, bolt tightening specification - 3 -: 10 Nm.

- Lift cover - 4 - from stop buffer.

- Loosen screw - 5 - at stop buffer - 6 - slightly until stop buffer can be moved to highest position - arrow -.

- Close rear lid to initial locking position - 1 - using light pressure over center.

- Open tailgate again.

- Tighten the bolt - 5 -, tightening specification: 10 Nm.

- Press cover - 4 - onto stop buffer.