Rear Lid Hinge

Rear Lid

Rear Lid Hinge

Removing





- Rear lid, removing, refer to => [ Rear Lid ] Rear Lid

- Remove the headliner.

- If equipped, remove screws - 3 - for bracket - 2 - to control module motor. Bracket remains in vehicle.

- Screw hex nut - 4 - in vehicle interior downward from hinge threaded screws - 1 - and remove hinge - 1 - from outside.

Installation





- Insert hinge in vehicle and install hex nuts - 4 - on threaded screws - 1 - on hinge.

- Align hinge to rear lid.

- Tightening specification for nuts - 4 -: 22 Nm.

- Tightening specification for screw - 3 -: 10 Nm.