Rear Lid Lock

Rear Lid

Rear Lid Lock

Removing





- Remove the rear lid trim panel.

- Loosen connector - 3 - on rear side of lock.

- Remove screws - 2 - and remove lock - 1 - from rear lid.

In case of an electrical fault, rear lid can be opened at emergency release - 4 -. The emergency release is reached through an opening in the rear lid trim.

Installation





- Secure connector - 3 - on rear side of lock.

- Insert lock - 1 - in rear lid and tighten screws - 2 -, tightening specification: 22 Nm.