Seat Bench

Rear Seats

Seat Bench

Removal

- In vehicles with heated rear seats, switch ignition off.

• To provide a better overview, rear seat backrest is not depicted in the illustration.

- Fold the left bench seat - 1 - forward.

- Fold the right bench seat - 2 - forward.

- On vehicles with heated rear seats, disconnect seat heating wiring harness.

- Remove the two bolts - 3 - (8 Nm) and then remove the left bench seat - 1 - from the vehicle.

- Remove the two bolts - 4 - (8 Nm) and then remove the right bench seat - 2 - from the vehicle.





Installation

- To install, perform the steps used for removal in reverse order.