Transmission and Valve Body Component Overview
Transmission and Valve Body Component Overview
1 Automatic Transmission Fluid (ATF) Inspection Plug
• ATF level, checking and topping off. Refer to => [ Automatic Transmission Fluid Level, Checking and Filling ] Automatic Transmission Fluid Level, Checking and Filling.
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
2 Oil Seal
• Always replace
3 Overflow Tube
• Unscrew to drain the ATF.
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
4 Oil Pan
• Removing and installing, refer to => [ Oil Pan ] Service and Repair.
5 Bolt
• Tighten the oil pan bolts in several stages in a diagonal sequence.
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
6 Gasket
• With spacers (quantity: 8).
• Check before installing
• Replace brittle, cracked or deformed gaskets.
7 Magnet
• Quantity: 2, in the oil pan depressions.
• Clean before installing the oil pan.
8 Bolt
• For mounting the valve body to the transmission.
• Quantity: 12, various lengths, refer to => [ Valve Body Bolt Lengths
and Locations ] Valve Body.
• Always replace the bolts.
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
9 Bolt
• Quantity: 3
• For securing the oil filter to the valve body.
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
10 Oil Filter
• Removing and installing, refer to => [ Oil Filter ] Service and Repair.
11 Valve Body
• Removing and installing, refer to => [ Valve Body ] Valve Body.
12 Bolt
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
13 Bolt
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
14 Transmission Input Speed (RPM) Sensor (G182)
• Removing and installing, refer to => [ Transmission Input Speed Sensor ] Transmission Input Speed Sensor.
15 Bolt
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
16 Transmission Output Speed (RPM) Sensor (G195)
• Removing and installing, refer to => [ Transmission Output Speed Sensor ] Transmission Output Speed Sensor.
17 Transmission Housing
• Shown here without a oil cooler.
18 Breather Cap
19 Multifunction Transmission Range Switch (F125)
• Removing and installing, refer to => [ Multifunction Transmission Range Switch ] Service and Repair.
• Adjusting, refer to => [ Multifunction Transmission Range Switch, Adjusting ] Adjustments.
20 Transmission Fluid Temperature Sensor (G93)
• Integrated into the wiring harness.
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
• Removing and installing, refer to => [ Solenoid Valve and Sensor Wiring Harness ] Service and Repair.
• Wire routing, refer to => [ Wire Routing, Connectors and Bracket on Valve Body ] Wire Routing, Connectors and Bracket on Valve Body.
21 Bolt
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
22 Bolt
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
23 Sensor Wiring Harness
• With the transmission fluid temperature sensor (G93).
• For the transmission input speed (RPM) sensor (G182).
• For the transmission output speed (RPM) sensor (G195).
• Always replace the seal on the connector housing.
• Removing and installing, refer to => [ Solenoid Valve and Sensor Wiring Harness ] Service and Repair.
• Wire routing, refer to => [ Wire Routing, Connectors and Bracket on Valve Body ] Wire Routing, Connectors and Bracket on Valve Body.
24 Oil Seal
• Always replace.
25 ATF Drain Plug
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
26 Selector Lever
• For the selector shaft.
• Removing and installing, refer to => [ Remove the shift lever from
the selector shaft. ] Valve Body.
27 Washer
28 Nut
• Installed position: the centering collar faces the washer - item 27 -.
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.
29 Spring
30 Damping Plunger
31 Solenoid Valve Wiring Harness
• Always replace the seal on the connector housing.
• Removing and installing, refer to => [ Solenoid Valve and Sensor Wiring Harness ] Service and Repair.
• Wire routing, refer to => [ Wire Routing, Connectors and Bracket on Valve Body ] Wire Routing, Connectors and Bracket on Valve Body.
32 Bolt
• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.