Hella Headlamp Range Control Positioning Motor

Headlamps

Hella Headlamp Range Control Positioning Motor

• The following illustrations depict replacement of headlamp beam adjusting motor at right headlamp.

• Replacement of Left Headlamp Beam Adjustment Motor and of Right Headlamp Beam Adjustment Motor is performed analogously.

Removing:

- Remove headlamp, refer to => [ Headlamps ]. Headlamps

- Pull off cover cap - 1 -.





- Rotate headlamp beam adjustment motor - 1 - in - direction of arrow - and remove it.





- Disconnect the connector - 2 - on the headlamp range control positioning motor - 1 -.





Installing:

Install in reverse order of removal, noting the following:

- Carefully insert ball head of headlamp beam adjustment motor - 1 - into ball head guide - arrow -, pull reflector toward rear while doing this.





- Now place adjustment motor into mount and rotate it approximately 30° clockwise until it engages.

• When installing cap, ensure proper seating. It is destroyed by entry of water into headlamp.