Relay Carrier In Left Instrument Panel, Removing And Installing

Relay Carrier In Left Instrument Panel, Removing And Installing

CAUTION: When disconnecting and connecting battery, the procedure must be followed as described.

Removing:
- Disconnect battery.
- Remove instrument panel.







- Remove relays -arrows- from relay carrier.

NOTE: The number of relays and fuses is dependent on vehicle equipment.







- Clip retainers in direction of -arrow- outward and then press connectors -1- through relay carrier.







- Disengage bracket -arrow A- and pull off bracket with fuse from relay carrier in -direction of arrow B-.







- Disengage catches in -direction of arrow- and pull thermo-fuses -1- out of mounts.







- Release retaining tab -1- in -direction of arrow A- and pull off mount from relay carrier in -direction of arrow C-.
- Release retaining tab -2- in -direction of arrow B- and pull off mount from relay carrier in -direction of arrow C-.







- Release retainer -1- for relay panel in direction of -arrow- and remove relay panel.

Installing:
Install in reverse order of removal, noting the following:
- First clip connector (for relay), holder (for fuse) and mounts (for thermo-fuses) into relay carrier.







- Place relay carrier -2- into guide -1- and then engage relay carrier.