Plenum Chamber Cover

Flush Bonded Windows

Plenum Chamber Cover

Removing





- Remove wiper arms.

- Pull off seal - 4 - on the entire length of plenum chamber cover - 1 and 3 -.

- Remove the clips - 5 - from the plenum chamber cover and the plenum chamber bulkhead.

- Pull out plenum chamber covers - 1 and 3 - starting at center carefully upward from binding profile - 4 -. Always begin with the top plenum chamber cover.

Installing





- Spray binding profile - 5 - with soap solution so that plenum chamber covers - 1 and 3 - can be pressed in more easily.

- Place plenum chamber covers - 1 and 2 - onto binding profile - 4 - and clip it into binding profile starting from center using light pressure. Begin with plenum chamber cover lying on bottom.

- Attach the plenum chamber cover to the plenum chamber bulkhead with the clips - 5 -.

- Install seal - 6 - on to plenum chamber cover and windshield wipers.

• New windshields have a insert in the binding profile. Remove the insert before installing the plenum chamber cover.