Bucket Seat Pan

Front Seats

Bucket Seat Pan

• The following describes removing and installing the outer backrest trim on the left side of the vehicle. The removal and installation of the other backrest trim are identical.

Removal

- Loosen the backrest trim - 1 - off the backrest near the catches - arrows - using the trim removal wedge (3409).

- Pull the backrest trim - 1 - toward the rear. Slide the backrest trim near the guides - 2 - out of the mounts in the backrest.





Installation

- To install, perform the steps used for removal in reverse order.

Bucket Seat Pan

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove front left bucket seat trim. Refer to => [ Left Bucket Seat Trim ] Left Bucket Seat Trim

- Remove the front seat belt latch:

• 2–door:=> [ Belt Latch, 2-door ] Seat Belts

• 4–door:=> [ Belt Latch, 4-door ] Seat Belts

- Remove front bucket seat backrest. Refer to => [ Front Bucket Seat Backrest ] Front Bucket Seat Backrest

- Remove cover and upholstery from front bucket seat backrests. Refer to => [ Front Bucket Seat Cover and Cushion ] Front Seat Covers and Upholstery

- Remove two screws - 1 - in front area (24 Nm).

- Remove screw - 2 - from seat base in rear left area (24 Nm).

- Remove screw - 3 - from seat base in rear right area (24 Nm).

• Screws - 1 - to - 3 - are micro-encapsulated. They must be replaced each time they are loosened.

• Before installing the new screws, the threads of the corresponding nuts must be cleaned.





Installation

- To install, perform the steps used for removal in reverse order.