Diagram 106/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Connector for: Rear Door Control Module, Auxiliary Air Heater, Comfort System, Wiper Motor, Rain/Light Recognition Sensor, Alarm Horn, Vehicle Inclination Sensor, Interior Monitoring





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G273 - Interior Monitoring Sensor

G384 - Vehicle Inclination Sensor Control Modules in Front Part of Vehicle

G397 - Rain/Light Recognition Sensor

H12 - Alarm Horn Locations

J388 - Left Rear Door Control Module Locations

J389 - Right Rear Door Control Module Locations

J393 - Comfort System Central Control Module Locations

J400 - Wiper Motor Control Module

J519 - Vehicle Electrical System Control Module

J604 - Auxiliary Air Heater Control Module, in fresh air duct

T3ae - 3-Pin Connector

T3f - 3-Pin Connector

T4ap - 4-Pin Connector

T4h - 4-Pin Connector

T4j - 4-Pin Connector

T4q - 4-Pin Connector

T6 - 6-Pin Connector

T10k - 10-Pin Connector, on heater

T18 - 18-Pin Connector

T18c - 18-Pin Connector

T18d - 18-Pin Connector

T28b - 28-Pin Connector, on left B-pillar

T28c - 28-Pin Connector, on right B-pillar

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

(B528) - LIN-Bus Connection 1 (in main wiring harness)

(B549) - LIN-Bus Connection 2 (in main wiring harness) foil Conductor

Previous Diagram 106/7 (Tracks 71-84)