Instrument Cluster: Description and Operation

Instrument Cluster

Work procedure "replace instrument cluster" contains the following scope of work:

• If a new instrument cluster is installed in the vehicle, the control module for instrument cluster must be set to the various equipment characteristics and corresponding country version.

• In order to adapt the integrated anti-theft immobilizer to the Engine Control Module (ECM), data from ECM must be stored in the replacement instrument cluster.

• Also, an adaptation of all vehicle keys must be performed after installing a new instrument cluster.

Special tools, testers and auxiliary items required

• Vehicle Diagnostic, Testing and Information System ( VAS 5051A)

• Diagnostic cable (VAS 5051/6A)

- Connect Vehicle Diagnosis, Testing and Information System. Refer to=> [ Vehicle Diagnosis, Testing and Information Systems ] Testing and Inspection.

- Select operating mode "Guided Fault Finding" on Vehicle Diagnostic, Testing and Information System (VAS 5051A ).

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Instrument Cluster

• Instrument cluster functions

• Instrument cluster, adaptation/replacing