Aero Windshield Wipers, Removing and Installing

Aero Windshield Wipers, Removing And Installing

Removing:

NOTE:
- Right and left wiper blades may not be interchanged during installation.
- Aero-wipers are very flexible. Grasp wiper blades only in area of wiper blade mount to lift them off front windshield.
- To remove wiper blades, wiper arms must be driven into "service/winter position". The "service/winter position" is activated by operating windshield wiper lever in "touch sweep" position within 10 seconds after switching off ignition.

- Drive wiper arms into "service/winter position", do this by operating windshield wiper lever into "touch sweep" position within 10 seconds after switching off ignition.
- Fold up wiper arm.







- Turn wiper blade -1- on wiper arm until it reaches stop -arrow A-.
- Pull off wiper blade -1- from wiper arm axle -arrow B-.

Installing:
- Slide wiper blade onto axle of wiper arm.
- Turn wiper blade on wiper arm axle until it reaches stop.
- Carefully fold wiper arm back onto windshield.