Battery, Transmitter and Receiver Unit, Fuse and Wiring Harness Overview

Battery, Transmitter and Receiver Unit, Fuse and Wiring Harness Overview





1 - Positive connection

• red wire with suitable connection

2 - to terminal 15a

• connection to terminal 15a,

• ensure wire is protected by fuse

• Fuse max. 15A

3 - Antenna ground

• ensure correct ground connection to body

• Antenna location must be treated with suitable corrosion protection

4 - Transmitting/Receiving Antenna

• Installation locations, refer to --> [ Transmitted Output, Antenna Installation Locations ] Locations

5 - Shielded antenna wire

• Wire with coaxial connector

6 - Telephone or two-way radio transmitter/receiver unit

7 - Wiring harness

• Voltage supply positive via read wire, 2.5 mm2 cross section

• Voltage supply negative via brown wire, 2.5 mm2 cross section

• If necessary, wire to terminal 15a via black wire 1.5 mm 2 cross section

8 - Fuse Holder

• Install next to battery

9 - To starter

10 - Battery

• Installation location under left front seat and with two battery systems, also in luggage compartment in spare wheel well.

11 - Negative wire

12 - Body ground