Timing Chain Cover and Side Sealing Flange Assembly Overview

Timing Chain Cover and Side Sealing Flange Assembly Overview

• Secure engine to engine and transmission stand (VAS 6095) when working on engine.





1 Seal

• For crankshaft.

• Replacing, refer to --> [ Seal, Flywheel Side ] Seal, Flywheel Side.

2 Sealing flange

• Transmission side.

• Removing and installing, refer to --> [ Sealing Flange, Transmission Side ] Sealing Flange, Transmission Side.

3 Bolt

• 23 Nm

4 Bolt

• Fasten in diagonal sequence in steps.

• 8 Nm

5 Seal

• 2 pieces.

• For camshaft adjustment valve 1 (N205) and camshaft adjustment valve 1 (exhaust) (N318)

• Replace if there is leakage or damage, refer to --> [ Camshaft Adjuster Valve Seal, Installing ] Service and Repair.

6 Bolt

• 10 Nm

7 Camshaft Position (CMP) sensor

• CMP sensor (G40) and CMP sensor 2 (G163)

8 O-ring

• 2 pieces.

• Replace.

9 Alignment pins

• 2 pieces.

10 Timing chain cover

• The version for vehicles without the mechanical vacuum pump is shown.

• Version for vehicles with mechanical vacuum pump, refer to --> [ Mechanical Vacuum Pump Assembly Overview ] Mechanical Vacuum Pump Assembly Overview.

• Can only be replaced with the engine removed.

11 Cylinder head gasket

• Clean holes and fill with sealant, refer to --> [ Installing ] Sealing Flange, Transmission Side.

12 Alignment pins

13 Bolt

• 10 Nm