HID Headlamp Mount

HID Headlamps with Cornering Lamp, from 12.06

HID Headlamp Mount

• The illustration shows the removal of the left headlamp mount. The same procedure is used to remove the right headlamp mount.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove front bumper.

- Remove bumper lower assembly component guide profile.

• For overview purposes, the headlamp mount is shown removed.

- Remove four mounting bolts and remove mount - 1 - forward out of body opening.





Installing

Install in reverse order of removal, noting the following:

- Check installation position of headlamp for uniform gap dimensions.

If headlamp has an uneven gap dimension to the body, installation position must be corrected --> [ Headlamps Correcting Installation Position ] Procedures.

- Check headlamp for function.

• If headlamp mount is removed, headlamp must always be adjusted after installation.

- Check and adjust headlamp aim if necessary