Ignition System General Information

Ignition System General Information

• Only the components which specifically relate to the ignition system are dealt with here.

• For trouble free operation of the electrical components a voltage of at least 11.5 V is necessary.

• It is possible that the control module will recognize a malfunction and store a Diagnostic Trouble Code (DTC) during some tests. After completing all tests and repairs, DTC memory should therefore be checked and erased if necessary. Refer to "Guided Functions".

• If the engine only starts briefly and then shuts off again after troubleshooting, repair or checking of the components, it may be that the immobilizer is blocking the Engine Control Module (ECM). ECM must then be adapted if necessary..