Operation CHARM: Car repair manuals for everyone.

Air Cleaner Housing: Locations



Air Filter, Assembly Overview

Connection to compressor for air suspension, separating







1 - Air duct
- Fastened to lock carrier
2 - Protective grommet
3 - Air filter lower part
4 - 10 Nm
5 - Filter element
6 - Air filter upper part
7 - Seal
- Replace if damaged
8 - Mass air flow (MAF) sensor G70
- Terminals of sensor and connector are gold-plated
- Black connector, 5-pin
9 - 6 Nm
10 - Spring-type clip
- Check for secure seat
11 - Connecting hose
12 - To suction jet pump
- Suction jet pump, assembly overview
13 - To Throttle Valve Control Module J338
14 - To compressor for air suspension
- Separating connection
- Depending on optional equipment, connection may be sealed with a blanking plug.
15 - Heat shield
- For upper part of air filter
16 - 6 Nm

Connection to compressor for air suspension, separating







- Separate connecting line at air filter - arrow - as follows:
- Carefully pry off green circlip - 1 - using a screwdriver. Then press clamping ring - 2 - in direction of - arrow - .







- Pull only loosened line - B - from connection - A - at air filter.