Cylinder Block

Cylinder Block
Cylinder bore
Diameter 89.010 mm
Deviation from nominal size, max. 0.08 mm

Crankshaft Main Bearing Cap Bolts 30 Nm plus an additional 1/2 turn (180°)
Two 90° further turns is permitted
Replace bolts

Crankshaft
Axial play
New 0.07 to 0.23 mm
Wear limit 0.30 mm
Radial clearance
Standard 0.02 to 0.06 mm
Wear limit 0.10 mm
Main bearing 59.958 to 59.978 mm
Connecting rod bearings 53.958 to 53.978 mm

Piston Ring End Gaps





Ring To Ring Groove Clearance





Piston and Cylinder Dimensions

Piston and cylinder dimensions:

Vibration damper bolt 100 Nm plus an additional 1/2 turn (180°)
Replace