Windshield Wiper Motor, Removing From Wiper Frame

Windshield Wiper System

Windshield Wiper Motor, Removing from Wiper Frame

• If a linkage with part number 7L0.955.601.B/ 602.B or higher is installed on a Touareg through MY 2007, the plenum chamber cover must be cut before installing --> [ Wiper Frame with Linkage, through 22.07 ]. Wiper Frame With Linkage, Through 22.07

- Remove hex nut - 1 -.





- Remove crank - 2 - from wiper motor shaft.

- Remove mounting bolts - arrows - for Windshield Wiper Motor (V).





- Remove Windshield Wiper Motor (V) from wiper frame.

• If Control Module for wiper motor (J400) or Windshield Wiper Motor (V) is replaced, Control Module for wiper motor (J400) must be coded --> [ Wiper Motor Control Module, Coding ] Testing and Inspection.