Access/Start Authorization Button

Access/Start Authorization


Access/Start Authorization Button

• The access/start authorization button (E408) allows the vehicle to be started without actively using the ignition key.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

CAUTION!
When disconnecting battery, procedure must always be followed as described in the reinformation anual --> [ Battery, with Auxiliary Battery or Two-Battery Layout, Disconnecting and Connecting ] Battery, with Auxiliary Battery or Two-Battery Layout, Disconnecting and Connecting. Not adhering to sequence will result in the deactivation of Main Battery Switch -E74- and subsequent damage to electrical system components.

- Disconnect battery --> [ Battery, One-Battery Layout, Disconnecting and Connecting ] Battery, One-Battery Layout, Disconnecting and Connecting.

- Remove gear selector cover --> Body Interior 68 Removal and Installation.

- Remove screws - arrows -.





- Disconnect electrical connector.

- Remove Access/Start Authorization Button (E408).

Installing

Install in reverse order of removal, noting the following:

• Adaptation or coding of Access/Start Authorization Button (E408) after removing and installing is not necessary.