Guide Wedge and Guide Pin, Adjusting

Rear Lid


Guide Wedge and Guide Pin, Adjusting





- The guide pin must be adjusted in the rear lid before adjusting the guide wedges.

- Tighten the bolts - 1 - and - 5 - just far enough until the bolt heads touch the guide wedge - 6 - and guide pin - 2 -.

- It must be possible to adjust guide wedges and guide pin in oblong holes using little force.

- Pull out guide wedges - 6 - on rear lid - 4 - as far as possible before adjusting - arrow -.

- To adjust, close rear lid in the center using light pressure.

- Open the rear lid and tighten bolts - 1 - and - 5 - to 6 Nm.