Procedures

Removal and Installation

• Cylinder heads with cracks between the valve seats, or between the valve seat and the spark plug threads, can continue to be used without reducing the service life, as long as the cracks have a max. width of 0.3 mm, or only the first 4 threads of the spark plug threads are cracked.

• After installing the camshafts, the engine may not be started for approximately 30 minutes. The hydraulic adjusting elements must seat themselves (otherwise the valves will seat themselves on the pistons).

• After working on the valvetrain, carefully rotate engine by hand at least 2 full revolutions to ensure that valves do not strike the pistons when starting.

--> [ Left Cylinder Head Cover ] Left Cylinder Head Cover

--> [ Right Cylinder Head Cover ] Right Cylinder Head Cover

--> [ Cylinder Head ] Cylinder Head

--> [ Camshaft ] Service and Repair

--> [ Valve Stem Seals ] Service and Repair