Dome Lamp: Service and Repair

Front Interior Light W1, Removing And Installing

CAUTION: When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

Removing:
- Switch off ignition, switch off all electrical components and remove ignition key.







- Carefully pry diffusion lens for Front Interior Light W1 out of console in molded headliner - arrow -.

Bulb, replacing:







- Push contact plate -1 - of Front Interior Light W1 in direction of - arrow - and remove bulb-2 -from socket.
- Replace bulb (12 V, 10 W).

Installing:
Install in reverse order of removal.