Ribbed Belt

Ribbed Belt

Removing

- Remove the front engine cover in - direction of arrows - if applicable.





• Before removing ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed turning direction can cause damage to the ribbed belt under operating conditions.

- To release ribbed belt tension, swing tensioner in - direction of arrow - with a standard 3/8" tool.





- Remove the ribbed belt and release tensioner.

Installing





- Place ribbed belt over the belt pulleys in the specified sequence.

1. Generator

2. Ribbed belt

3. Idler pulley

4. Vibration damper

5. Tensioner

• When installing the ribbed belt, make sure it is seated correctly on the pulleys.

The rest of the installation is performed in reverse order of removal, noting the following:

- Start the engine and check the belt running.