Ribbed Belt and Pulleys Overview

Ribbed Belt and Pulleys Overview





1 Bolt, 22 Nm

2 Tensioner

3 Ribbed belt

• Check for wear.

• Do not kink.

• Before removing, mark direction of rotation using chalk or felt tip marker. A reversed turning direction can cause damage to the ribbed belt under operating conditions.

• Removing and installing, refer to --> [ Ribbed Belt ] Ribbed Belt.

• When installing, make sure it is seated correctly on the pulleys.

4 Cap

5 Bolt, 22 Nm

6 Generator

7 Bolt, M8 - 22 Nm; M10 - 46 Nm

8 Alignment bushing

• For generator bracket.

• 2 pieces

9 Generator bracket

• Illustration does not correspond to version on vehicle.

10 Bolt, 9 Nm

11 Bracket

• For idler pulley.

12 Idler pulley

13 Bolt, 22 Nm

14 Vibration damper

• Removing and installing, refer to --> [ Vibration Damper ] Service and Repair.

15 Bolt, 22 Nm + 45° (1/8 turn) additional turn

• Replace

16 Alignment bushing

• 2 pieces

17 Bracket

• For belt tensioner.

18 Bolt, 9 Nm

• Note bolt lengths.