Cylinder Bank 1 Component Location
Cylinder Bank 1 Component Location
1 Ignition coils, cylinder bank 1
• Ignition coil 1 with power output stage (N70).
• Ignition coil 2 with power output stage (N127).
• Ignition coil 3 with power output stage (N291).
• Ignition coil 4 with power output stage (N292).
• Component location, refer to --> [ Components Located on Outside of Left Cylinder Head ] Cylinder Bank 2 Component Location
2 Camshaft Position (CMP) sensor 3 (G300)
• Component location, refer to --> [ Components Located on Outside of Right Cylinder Head ]
3 Mass Air Flow (MAF) sensor (G70)/Intake Air Temperature (IAT) sensor (G42)
4 Engine Control Module (ECM) (J623)
5 Camshaft adjustment valve 1 (exhaust) (N318)
• Component location, refer to --> [ Components Located on Outside of Right Cylinder Head ]
6 Fuel metering valve (N290)
• In high pressure pump.
7 Engine Coolant Temperature (ECT) sensor (G62)
8 Camshaft adjustment valve 1 (N205)
• Component location, refer to --> [ Components Located on Inside of Right Cylinder Head ]
9 Evaporative Emission (EVAP) canister purge regulator valve 1 (N80)
10 Camshaft Position (CMP) sensor (G40)
• Component location, refer to --> [ Components Located on Inside of Right Cylinder Head ]
11 Knock Sensor (KS) 2 (G66)
• Component location, refer to --> [ Components Located on Inside of Right Cylinder Head ]
• Removing and installing, refer to --> [ Knock Sensor ] Service and Repair.
12 Fuel injectors, cylinder bank 1
• Cylinder 1 fuel injector (N30).
• Cylinder 2 fuel injector (N31).
• Cylinder 3 fuel injector (N32).
• Cylinder 4 fuel injector (N33).
• Component location, refer to --> [ Components Located on Inside of Right Cylinder Head ]
13 Variable intake manifold runner motor (V183)
• Component location, refer to --> [ Components Located on the Front of the Engine (with an Aluminum Intake Manifold) ]
14 Fuel pressure sensor (G247)
• Component location, refer to --> [ Components Located on Inside of Right Cylinder Head ]
15 Secondary Air Injection (AIR) combination valve
• For cylinder bank 1.
16 Intake manifold runner position sensor (G336)
• Component location, refer to --> [ Components Located on the Front of the Engine (with an Aluminum Intake Manifold) ]
• After replacement, adapt in "Guided Functions" operating mode in "Adapting intake manifold runner position sensor".
17 Electrical connectors
• Black for knock sensor 1 (G61).
• Brown for knock sensor 2 (G66).
18 Knock Sensor (KS) 1 (G61)
• Component location, refer to --> [ Components Located on Inside of Right Cylinder
Head ]
• Removing and installing, refer to --> [ Knock Sensor ] Service and Repair.
Component Location of Fuel Metering Valve (N290)
• In right high pressure pump - arrow -.
Component Location of ECT Sensor (G62)
• On right rear coolant pipe - arrow -.
Components Located on Inside of Right Cylinder Head
1. Fuel pressure sensor (G247)
2. KS 1 (G61)
3. CMP sensor (G40)
4. Cylinder 1 fuel injector (N30)
5. Cylinder 2 fuel injector (N31)
6. Cylinder 3 fuel injector (N32)
7. Cylinder 4 fuel injector (N33)
8. Camshaft adjustment valve 1 (N205)
9. KS 2 (G66)
Components Located on Outside of Right Cylinder Head
1. CMP sensor 3 (G300)
2. Camshaft adjustment valve 1 (exhaust) (N318)
3. Ignition coil 4 with power output stage (N292)
4. Ignition coil 3 with power output stage (N291)
5. Ignition coil 2 with power output stage (N127)
6. Ignition coil 1 with power output stage (N70)
Component Location of EVAP Canister Purge Regulator Valve (N80)
1. EVAP canister purge regulator valve 1 (N80)
2. EVAP canister purge regulator valve (N80) electrical connector
Components Located on the Front of the Engine (with an Aluminum Intake Manifold)
1. Intake flap motor (V157) (brown connector)
2. Intake manifold runner position sensor (G336)
3. Variable intake manifold runner motor (V183) (black connector)
4. Intake manifold runner position sensor 2 (G512)
Components located on the Front of the Engine with an Plastic Intake Manifold)
1 KS 2 (G66) (brown connector)
2 KS 1 (G61) (black connector)
3 Fuel metering valve (N290)
4 Intake manifold runner position sensor (G336)
5 Fuel pressure sensor (G247)
6 Intake Manifold Runner Control (IMRC) valve (N316)
7 Intake Manifold Tuning (IMT) valve (N156)
8 Intake manifold runner position sensor 2 (G512)
9 Fuel metering valve 2 (N402)
10 KS 4 (G199) (black connector)
11 KS 3 (G198) (brown connector)