Tension Strut Assembly Overview

Tension Strut Assembly Overview

CAUTION:
- Left and right tension strut contact surfaces must be free of wax or debris.
- Screws should only be tightened when vehicle is resting on wheels.







1 - Left tension strut
2 - Right tension strut
3 - Screw
- Qty. 1 per tension strut
- Tightening torque: 90 Nm + 1/8 additional turn (45 degree)
- Always replace bolts after loosening

4 - Screw
- Qty. 2 per tension strut
- Tightening torque: 40 Nm + 1/8 additional turn (45 degree)
- Always replace bolts after loosening