Entry Assistance Unit Release Cable

Entry Assistance Unit Release Cable

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove the front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove the trim from on the tunnel side from the seat. Refer to => [ Seat Trim, Tunnel-Side ] Seat Trim, Tunnel-Side

- Remove the trim on the sill-side from the seat. Refer to => [ Sill-Side Seat Trim ] Sill-Side Seat Trim

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Disengage the release cable - 1 - from the bracket - 2 -.

- Disengage eyelet - 3 - from pins - 4 -.

- Disengage the release cable - 1 - from the bracket - 5 -.

- Thread end of release - 7 - out of bracket - 6 -.






Installation

- Install in reverse order of removal.