Cylinder Head, Valvetrain - Fastener Tightening Specifications

Fastener Tightening Specifications






• 1 Always replace

• 2 Install using locking fluid

Cylinder Head Cover Bolt Tightening Sequence and Specification






- Tighten the cylinder head cover bolts in the sequence shown and in stages to 10 Nm

Cylinder Head Bolt Tightening Sequence and Specification






- Tighten the cylinder head bolts in the sequence shown as follows:

• Tighten the bolts a first pass to 40 Nm

• Tighten the bolts a second pass an additional 90° (1/4) turn

• Tighten the bolts a final pass an additional 90° (1/4) turn

Guide Frame Bolt Tightening Sequence and Specification






- Gently tighten the bolts working from the inside toward the outside in several stages.

- Then tighten the bolts in the designated sequence to 8 Nm + an additional 90° (1/4) turn.