Interrogating the Fault Memory (Mode 3)

Interrogating the Fault Memory

Procedure

- Connect the scan tool.

- Switch the ignition to the "ON" position.

- Select "Diagnostic Mode 03: Interrogating fault memory ".

- The stored DTC or DTC's will be displayed on the scan tool screen.

The following table is an example of the DTC information that may be displayed on the scan tool screen:






- Refer to the following DTC tables for the diagnostic repair procedure:

• SAE P0xxx Diagnostic Trouble Codes => [ SAE P0xxx Diagnostic Trouble Codes ] P Code Charts.

• SAE P1xxx Diagnostic Trouble Codes => [ SAE P1xxx Diagnostic Trouble Codes ] P Code Charts.

• SAE P2xxx Diagnostic Trouble Codes => [ SAE P2xxx Diagnostic Trouble Codes ] P Code Charts.

• SAE P3xxx Diagnostic Trouble Codes => [ SAE P3xxx Diagnostic Trouble Codes ] P Code Charts.

• SAE U0xxx Diagnostic Trouble Codes => [ SAE U0xxx Diagnostic Trouble Codes ] U Code Charts.

- Switch the ignition off.

- End of diagnosis.