Mounting Bracket

Mounting Bracket

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1331)

Removing

- Remove the steering column. Refer to => [ Steering Column ] Steering Column.

- Remove the instrument cluster.

- Remove bolts - arrows - under the console.






- Slide connector - 1 - in - direction of arrow - and remove it from mount in mounting bracket.






- Remove the bolt - arrow A -.

- Remove bolts - arrows B - from console on body.

• The bolts - arrows B - are installed through the crossmember.

- Remove the bolts - 1 - and - 2 - and remove mounting bracket from body.






Installing

- Install mounting bracket and install bolts - 1 - and - 2 -.






- Install bolts - arrows B -.






• The bolts - arrows B - are installed through the crossmember.

- Install bolt - arrow A -.

- Insert connector - 1 - into mount in mounting bracket and slide it in opposite - direction of arrow - until it stops.

- Install bolts - arrows - under console.






- Install the steering column. Refer to => [ Installing ] Steering Column.

- Install the instrument cluster.

- Perform basic setting on the steering angle sensor (G85) using the Vehicle Diagnostic Tester.

Tightening Specifications