Clutch: Application and ID

Determining Clutch Manufacturer

Either a "Sachs" or a "LuK" clutch may be installed.

It is possible to tell which clutch the vehicle has with the transmission installed:

- Remove the noise insulation.

- Remove the noise insulation from the below the oil pan, if necessary.

There are some openings - arrows - between the engine - A - and the transmission - B - near the bottom of the oil pan.






- Check the outer contour of the flywheel through these openings.

- On different engines, the outer contour of the flywheel can also be inspected by removing the small cover plate - A -.






Round Outer Contour - arrows - = Sachs Clutch - A -:

- Sachs clutch removing and installing. Refer to => [ Clutch, Sachs ] Clutch, Sachs.

- Sachs clutch overview. Refer to => [ Clutch Overview, Sachs ] Clutch Overview, Sachs.






Squared Outer Contour - arrows 1 - and a Circulated Depression - arrow 2 - = LuK Clutch - B -:

or

Round Outer Contour - arrows 1 - and a Circulated Depression - arrow 2 - = Luk Clutch - B -:






- Luk clutch removing and installing. Refer to => [ Clutch, LuK ] Clutch, LuK.

- LuK clutch overview. Refer to => [ Clutch Overview, LuK ] Clutch Overview, LuK.