Bracket and Support, Power Seat

Bracket and Support, Power Seat

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removing

- Switch off ignition.

- Remove the trim from the sill-side of the power seat. Refer to => [ Power Seat Sill-Side Trim ] Power Seat Sill-Side Trim

- Remove bolts - 1 - (3.5 Nm) and remove bracket - 2 - from seat frame.

- Remove two bolts - 3 - (3.5 Nm) and remove bracket - 4 - and spacer pipe - 5 - from seat frame.






Installation

- Install in reverse order of removal.