Diagram 104/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Intake Manifold Runner Position Sensor, Engine Speed (RPM) Sensor, Injectors





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor 2.0L CCTA, CBFA and BPY Overviews

G336 - Intake Manifold Runner Position Sensor 2.0L CCTA, CBFA and BPY Overviews

N30 - Cylinder 1 Fuel Injector 2.0L CCTA, CBFA and BPY Overviews

N31 - Cylinder 2 Fuel Injector 2.0L CCTA, CBFA and BPY Overviews

N32 - Cylinder 3 Fuel Injector 2.0L CCTA, CBFA and BPY Overviews

N33 - Cylinder 4 Fuel Injector 2.0L CCTA, CBFA and BPY Overviews

J519 - Vehicle Electrical System Control Module Overview of Control Modules

J623 - Engine Control Module (ECM), in plenum chamber, center Overview of Control Modules

T2cg - Double Connector

T2ch - Double Connector

T2ci - Double Connector

T2cj - Double Connector

T3v - 3-Pin Connector

T3as - 3-Pin Connector

T6aq - 6-Pin Connector, on engine, front

T8i - 8-Pin Connector, on engine, front

T60 - 60-Pin Connector

(D101) - Connection 1 (in engine compartment wiring harness)

(D108) - Connection 6 (in engine compartment wiring harness)

Previous Diagram 104/10 (Tracks 113-126)

Next Diagram 104/12 (Tracks 141-154)