Diagram 104/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Multi-function Indicator, Instrument Cluster Control Module, Vehicle Electrical System Control Module, Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J119 - Multi-function Indicator

J285 - Instrument Cluster Control Module Overview of Control Modules

J519 - Vehicle Electrical System Control Module Overview of Control Modules

J533 - Data Bus On Board Diagnostic Interface, in left footwell, near center console Overview of Control Modules

K132 - Electronic Power Control (EPC) Warning Lamp

T12n - 12-Pin Connector

T16 - 16-Pin Connector, under instrument panel, left, Data Link Connector (DLC)

T20 - 20-Pin Connector

T36 - 36-Pin Connector

(376) - Ground Connection 11 (in main wiring harness)

(381) - Ground Connection 16 (in main wiring harness)

(640) - Ground Connection 2 (in engine compartment, left) Overview of Ground Connections in Engine Compartment

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

* - Only models with flexible Service Reminder Indicator (SRI)

Previous Diagram 104/16 (Tracks 197-210)

Next Diagram 104/18 (Tracks 225-238)