HID Headlamps and Cornering Lamp (AFS Light System), Service Information

HID Headlamps and Cornering Lamp (AFS Light System), Service Information

Gas Discharge Lamps






Illustration depicts the left headlamp as installed.

• Headlamp must be removed to replace gas discharge lamps.

The right headlamp bulb is replaced is the same way.

The gas discharge lamp is located behind the housing cover - B -.


• Gas discharge lamps should only be changed by a trained professional.

• Always following usage and safety information for gas discharge lamps. Refer to => [ HID Headlamps, Usage and Safety Precautions ] Service Precautions!

Bulbs For Turn Signal, Parking Lamp, and Static Cornering Lamp

• The bulbs for the turn signal, parking lamp, and static cornering lamp can be changed with the headlamp installed.

• In order to be able to replace the bulb, it is sometimes necessary to remove neighboring components at the corresponding headlamp.

• The following work description explains which adjacent components must be removed.

The turn signal and parking lamps are located behind the housing cover - 4 -.






The cornering light is located behind the housing cover - 3 -.

• Headlamps are equipped with One Touch System, meaning the lamps can be loosened and removed using a handle.

• The bulb for the turn signal and the bulb for the cornering lamp are equipped with a bayonet fastener.

• For reasons of clarity, the headlamps are depicted in the removed state in the following work descriptions.