Oil Filter: Locations

Oil Filter, Cooler and Oil Pressure Switch Assembly Overview





1 - Accessory Bracket

2 - Oil pressure switch F1
^ 1.4 bar - black
^ 21 Nm

3 - Gasket
^ Replace

4 - O-ring
^ Replace

5 - O-ring
^ Replace

6 - Valve unit

7 - Oil filter element
^ 22 Nm
^ Remove and install using oil filter wrench 3417

8 - Bolt
^ 15 Nm

9 - Connection

10 - Seal
^ Replace

11 - Oil cooler

Note:
^ If large quantities of metal particles or abraded material are detected during engine repairs, it may be an indication for a damaged crankshaft or rod bearings. To prevent further damage, perform the following steps after the repair:.

^ Ensure sufficient clearance to surrounding components

12 - Gasket
^ Replace

13 - Bolt